The Migatronic Focus TIG 200 DC HP is a single-phase (230 V) inverter device, ideal for welding on site and in the workplace where high performance is required. This Migatronic welding machine is also suitable for MMA welding using all types of rutile and standard electrodes.
Save your settings and parameters
The digital control panel guarantees uniform setting of parameters for frequently recurring welding work and optimum control of the molten bath. The control panel is equipped with a TIG DC pulse function.
HF / LIFTIG ignition (with / without high frequency) ensures that the machine is suitable for all operating conditions.
25% higher welding current
The Focus TIG 200 DC HP is equipped with PFC (Power Factor Correction), an electronic circuit that ensures maximum use of power
and a minimum power loss that allows welding with approximately 25% higher welding current with fuses of only 16 A.
Welding with long power cables or generators
A new technology guarantees a voltage tolerance of -40 to + 10%, making welding with long power cables or a generator as a power source possible.
|Connection voltage +/- 15%, V||1×230|
|Operating time 40°C 100%, A/V||150 / 16.0|
|Operating time 40°C 60%, A/V||170 / 16.8|
|Operating time 20°C 100%, A/V||170|
|Operating time 20°C 60%, A/V||200|
|Open voltage, V||95|
|Current range, A||5-200|
|Protection class||IP 23|
|Norm||EN / IEC60974-1, EN / IEC60974-3, EN / IEC60974-10|
|Dimensions (HxWxL), mm||250x180x470|
1x Welding torch 4 meters
1x Earth cable
1x Power cable with plug
1x Dutch manual
To use this welding machine you need a Mixing shaft valve .