Portable, multi-function mono-phase welding machine for MIG, MMA and simple TIG welding. PFC (Power Factor Correction) allows welding with long mains cable. Polarity reserval for welding with Innershield wires. Software update via SD card. Large range of optional equipment
* Mains cable with Schuko plug * 1.5 m earth cable with earth clamp * 0,6V-0,8V wire drive roll (included) * 0.8V-1.0V wire drive roll (extra) * Handle and carrying strap * Photo may vary from actual product
The smallest welder in the Migatronic range is the 161i RallyMIG. It is a fully synergic multi-process welder which will allow you to simply dial in the wire being used and the material being welded. No fussing around with getting the wire feed speed and voltage set correctly this machine really is a switch on, press and weld type with no adjustments necessary.
If you would rather set it based on the material thickness being welded then you can do this too!
Whether you work on site, in a workshop or are simply just a one man repair man, this MIG welder is the one for you. This machine can be used without gas (gasless) on a reversed polarity, with pure argon, pure CO2 or a mixed gas similar to Hobbyweld 5. If you are welding or MIG brazing then there will be a built in program perfect for you.
For those of you who need to have a welder that can be run on long extension cables, look no further. With the Migatronic RallyMIG being Power Factor Corrected (PFC) you can run long mains cables without having to worry about power loss. What”s more, if you need a long power cable then the chances are you might not have gas. To reverse the polarity all you need to do is undo the thumb turn knobs and swap the cable over then you are set to weld gasless.
On the flip side, maybe you are a small car garage? Well this little mean machine can run as low down as 20 Amps and as such when running 0.6mm wire you will find that you have incredible control over welding thin plate and (dare I say it) even rusty plate.
The MIG torch that is included with the torch can also be fitted with an add-on to allow amperage adjustment while holding the torch and welding. All you have to do is simply slip out the blanking plate and slide in the upgrade.
If you want a welder that can do it all then this is your one. A confident MIG welder, a convenient MMA welder and a useful scratch TIG welder all in one box.
Whatever you want from your machine you can add MMA cables, TIG torches, MIG torch control upgrades and even a machine trolley. It is totally your choice and it means you can make your welder as bespoke as you want it.
Mains voltage +/- 15% 1×230 V
Fuse 16 A
Duty cycle 100% at 40°C, A/V 110/24,0
Duty cycle 60% at 40°C, A/V 115/24,6
Duty cycle 100% at 20°C, A 135
Duty cycle 60% at 20°C, A 145
Open circuit voltage 75 V
Current range 20-160 A
Protection class IP 23S
Dimensions HxWxL, mm 370x230x450
Weight, kg 13