This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Buy Now, Pay Later In 3 Interest-Free Payments
HMT VersaDrive Oversized Galv ImpactaTap M30.4 x 3.5mm 308020-0300
£129.39 ex. VAT £155.27 inc VATTapping Hole Size requred: 26.5mm; For fastest performance use on impact wrenches & impact drivers
Check the minimum torque requirement
Tapping Stainless Steel requires higher impact torque
Use appropriate lubrication and correct RPM to achieve long tool life
HMT HSS SilverMax Weldon Twist Drill 10.2mm (M12 Tap Size) 201070-0102
£18.82 ex. VAT £22.58 inc VAT30mm Cutting length; 19.05 Weldon Shank; Fits all standard magnet drills; M12 Tapping size
HMT CarbideMax 80 TCT Deep Broach Cutter 16mm 108010-0160
£64.52 ex. VAT £77.42 inc VATFits any standard magnet drill; Premium quality Tungsten Carbide Tips; Special teeth geometry for fast, quiet cut; Reduced chatter; Large range of sizes and depths available
HMT CarbideMax 55 TCT Broach Cutter 26.5mm (M30 Tap Size) 108020-0265
£57.29 ex. VAT £68.75 inc VATFits any standard magnet drill; Premium quality Tungsten Carbide Tips; Special teeth geometry for fast, quiet cut; Reduced chatter; Large range of sizes and depths available
HMT VersaDrive Impact Reamer 14mm 501030-0140
£44.03 ex. VAT £52.84 inc VATSize refers to the finished hole size; Tapers from 7.5mm; 144m OAL
For fastest performance use on impact wrenches & impact drivers
Impact driven reamers are not recommended for Flame or Plasma cut holes. Use with a Magnet Drill
Reamer should be rotating before starting the cut & steady feed pressure should be used through the cut
For materials thicker than 20mm use of ImpactaMag reamers is recommended
HMT VersaDrive Rapid-Lock ½” Impact Wrench Adapter 111130-012A
£44.40 ex. VAT £53.28 inc VAT55mm OAL
HMT Mag Drill Adapter 19.05mm to 32mm c/w Pilot Pin for HMT XL55 Cutters 103091-1932-55
£56.05 ex. VAT £67.26 inc VATPrecision ground steel; Bright Finish
HMT Grub Screw for Magdrill Arbor M6 x 6mm (M3 Hex), Pack 10 103060-0606
£4.38 ex. VAT £5.26 inc VATHMT HSS Silvermax Weldon Twist Drills Set 6.0, 8.0, 10.0, 12.0mm 201070-SET
£70.08 ex. VAT £84.10 inc VAT30mm Cutting length; 19.05 Weldon Shank; Fits all standard magnet drills
HMT HSS SilverMax Weldon Twist Drill 10mm 201070-0100
£18.17 ex. VAT £21.80 inc VAT30mm Cutting length; 19.05 Weldon Shank; Fits all standard magnet drills
HMT HSS SilverMax Weldon Twist Drill 8mm 201070-0080
£16.62 ex. VAT £19.94 inc VAT30mm Cutting length; 19.05 Weldon Shank; Fits all standard magnet drills
HMT HSS SilverMax Weldon Twist Drill 6.8mm (M8 Tap Size) 201070-0068
£16.09 ex. VAT £19.31 inc VAT30mm Cutting length; 19.05 Weldon Shank; Fits all standard magnet drills; M8 Tapping Size
HMT HSS SilverMax Weldon Twist Drill 6mm 201070-0060
£15.98 ex. VAT £19.18 inc VAT30mm Cutting length; 19.05 Weldon Shank; Fits all standard magnet drills
HMT HSS SilverMax Weldon Twist Drill 5mm (M6 Tap Size) 201070-0050
£15.51 ex. VAT £18.61 inc VAT30mm Cutting length; 19.05 Weldon Shank; Fits all standard magnet drills; M6 Tapping Size
HMT VersaDrive 90ø Countersink 25.0mm (M12) 603060-0250
£57.11 ex. VAT £68.53 inc VATOptimum life and performance when used with rotary pistol drills or drill presses
Up to 16.5mm can be used on impact wrench & impact drivers for fast cutting performance
Suitable for harder materials such as stainless steel when used at reduced RPM
Use appropriate lubrication and correct RPM to achieve long tool life
HMT VersaDrive Spiral Flute Combi Drill-Tap M5 x 0.8mm 301125-0050
£24.68 ex. VAT £29.62 inc VATRated up to 5mm thick steel; For fastest performance use on impact wrenches & impact drivers (Check minimum torque requirement)
Maximum tapping thickness is the thread diameter of the drill-tap
Tapping Stainless Steel requires higher impact torque
Use appropriate lubrication and correct RPM to achieve long tool life
HMT VersaDrive ImpactaTap 1/4″ x 19 BSP 308070-0020
£50.43 ex. VAT £60.52 inc VATTapping Hole Size requred: 11.8mm; For fastest performance use on impact wrenches & impact drivers
Check the minimum torque requirement
Tapping Stainless Steel requires higher impact torque
Use appropriate lubrication and correct RPM to achieve long tool life
HMT VersaDrive ImpactaTap M20 x 2.5mm 308010-0200
£72.98 ex. VAT £87.58 inc VATTapping Hole Size requred: 17.5mm; For fastest performance use on impact wrenches & impact drivers
Check the minimum torque requirement
Tapping Stainless Steel requires higher impact torque
Use appropriate lubrication and correct RPM to achieve long tool life
HMT VersaDrive ImpactaTap M16 x 2.0mm 308010-0160
£56.17 ex. VAT £67.40 inc VATTapping Hole Size requred: 14.0mm; For fastest performance use on impact wrenches & impact drivers
Check the minimum torque requirement
Tapping Stainless Steel requires higher impact torque
Use appropriate lubrication and correct RPM to achieve long tool life