Trend 62/10 x 1/4 TCT Drill / Countersink / Counterbore

£58.35 ex. VAT     £70.02 inc VAT

Trend 620/4WS Countersink

£9.80 ex. VAT     £11.76 inc VAT

Trend 6200/8 HS Countersink Set

£16.00 ex. VAT     £19.20 inc VAT

Trend 6200/8 TCT Countersink Set

£25.79 ex. VAT     £30.95 inc VAT

HMT 601056-0400 TUNGSTEN CARBIDE MULTISINK ULTRA COATING 40MM, 90

£255.16 ex. VAT     £306.19 inc VAT
Up to 4 times longer life and 15% faster cuts than HSS cutters
Individually brazed teeth of the highest quality carbide
Geometric design for faster, quieter and easier drilling

HMT GoldMax 90° Magnet Drill Countersink 30mm 601025-0300

£68.89 ex. VAT     £82.67 inc VAT
Min start size 4mm; 47mm OAL

HMT GoldMax 90° Magnet Drill Countersink 40mm 601025-0400

£86.95 ex. VAT     £104.34 inc VAT
Min start size 7mm, 52mm OAL

HMT GoldMax 90° Magnet Drill Countersink 55mm 601025-0550

£122.12 ex. VAT     £146.54 inc VAT
Min start size 9mm, 60mm OAL

HMT Magnet Drill Countersink – 50mm, 60 Degree 601040-0500

£152.06 ex. VAT     £182.47 inc VAT
High Speed Steel material with precision ground flutes. Standard 19.05mm Weldon shank for use in all standard magnet drills.

HMT Morse Taper Shank (MT3) 90° Carbide Indexable Countersink 76mm 602040-0760

£1,123.04 ex. VAT     £1,347.65 inc VAT
Supplied with set of 3 tips which are double sided for extended use.

HMT MultiSink 40mm, 90° 601050-0400

£116.14 ex. VAT     £139.37 inc VAT
Magnet drill stroke needed is 44-60mm To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When used to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/Countersink, the correct RPM should be used for each separate operation

HMT MultiSink 55mm, 90° 601050-0550

£143.61 ex. VAT     £172.33 inc VAT
Magnet drill stroke needed is 44-60mm To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When used to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/Countersink, the correct RPM should be used for each separate operation

HMT MultiSink Pilot 16mm 601050-0160

£15.56 ex. VAT     £18.67 inc VAT
Magnet drill stroke needed is 44-60mm To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When used to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/Countersink, the correct RPM should be used for each separate operation

HMT MultiSink Pilot 18mm 601050-0180

£16.22 ex. VAT     £19.46 inc VAT
Magnet drill stroke needed is 44-60mm To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When used to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/Countersink, the correct RPM should be used for each separate operation

HMT MultiSink Pilot 20mm 601050-0200

£16.57 ex. VAT     £19.88 inc VAT
Magnet drill stroke needed is 44-60mm To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When used to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/Countersink, the correct RPM should be used for each separate operation

HMT MultiSink Pilot 22mm 601050-0220

£19.83 ex. VAT     £23.80 inc VAT
Magnet drill stroke needed is 44-60mm To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When used to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/Countersink, the correct RPM should be used for each separate operation

HMT MultiSink Pilot 24mm 601050-0240

£20.36 ex. VAT     £24.43 inc VAT
Magnet drill stroke needed is 44-60mm To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When used to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/Countersink, the correct RPM should be used for each separate operation

HMT MultiSink Pilot 26mm 601050-0260

£24.62 ex. VAT     £29.54 inc VAT
Magnet drill stroke needed is 44-60mm To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When used to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/Countersink, the correct RPM should be used for each separate operation

HMT Tungsten Carbide MultiSink 40mm, 90° 601055-0400

£205.93 ex. VAT     £247.12 inc VAT
To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When using to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/ Countersink, the correct RPM should be used for each separate operation

HMT Tungsten Carbide MultiSink 55mm, 90° 601055-0550

£269.45 ex. VAT     £323.34 inc VAT
To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features For predrilled holes the MultiSink should always be used with a pilot to avoid damage When using to drill or broach & countersink it is important to use the correct RPM for each separate operation When used for multiple operations eg Drill/Tap/ Countersink, the correct RPM should be used for each separate operation