Clear Vision Technology
High definition led screen mounted at the optimum angle for improved visibility and viewing comfort.
Colour TFT LCD Display
An optional colour display with additional storage of set up, fault and consumable guides.
ABAP – Active Balancing Air Passage
An effective deign for the cooling air flow to improve the power source’s performance and increase the life of components.
Wireless Connection
Fitting the optional wireless module allows the use of wireless accessories.
Dedicated wireless remote controls
A range of wireless remote controls hand or foot operated with no mechanical ports.
Wired remote controls
A range of wired remote controls hand or foot operated with no mechanical parts.
Quick factory reset
Quick reset to the factory programmed setting in the event of incorrect setting by the operator.
Dash-Arc
Dash-Arc is o technology for HF TIG ignition, which combines an HF boosting circuit and programming logic to achieve high ignition performance. Dash-Arc technology delivers better than 99% arc striking success rote with an ignition response rate of S0-60ms.
Smart Lift TIG
Controls the short circuit current at the start to avoid any tungsten contamination and identifies accidental short circuits to maintain welding. Arc length cut off eliminates arc wander.
HF Stabilising Technology
Provides stable HF oscillation regardless of input voltage stability.
Sure Plasma Technology
The machine calculates the optimum start conditions based on the torch length automatically.
Mesh Cutting
Used for cutting mesh or metal with gaps. Eliminates the need for stop/ start using the torch switch.
Power Factor Correction (PFC)
Energy saving benefits for the user from high efficiency.
Wide Voltage Application
The design allows operation between 95- 265V input without the need for any internal changes.
Intelligent Synergic Control
The units are pre-programmed for many material types and sizes for easy operation.
50/ 60Hz Input Power Source
The power source can be connected to 5OHz or 60Hz power supplies with no need to change any settings.
On Demand Fan
The fan will only start when required by the machine and turn off when not required saving energy. This also reduces the amount of dust drawn into the machine extending component life.
Auto Sleep Mode
The machine will go to sleep after a pre-set time to save energy (less than 50W). It returns to full function by pressing any key.
Smart Gas
Calculates the optimum post gas delay lime based on current and weld time to save gas.
Welding Engineer Mode
Allows access to sub menu elements to check or change parameters.
LED Inside The Wire Feed Cabinet
An LED light aid so the operator can see inside the wire cabinet.
Handy Accessory Storage Slot
A small storage for spare drive rolls and contact tips.
Energy Saving and Environment Friendly
All models are RoHS 2.0 compliant.
Unique IGBT Pin Holder
IGBT pin holder with the intersectory air exhaust that improves the power source’s overall performance and reliability.